Stainless Steel Dish Drying Rolling Rack
17"×12"
Sale price
$29.99
Regular price
$50.00
Skip to product information
Free tracked US shipping — 5–10 business days
30-day returns — free prepaid US return label
Dispatched in 1–3 business days
SSL-encrypted secure checkout
Will it fit your sink?
Measure the opening of your sink from front edge to back edge before you order — that one number decides everything. This rolls out to 17"×12" and is designed to span a sink, so the span is the only thing that can go wrong. If your sink is narrower than 17" across, it rests on the rims and works. If it's wider, it won't bridge.
| Choose | If this sounds like you |
|---|---|
| 17"×12" | A standard single or double sink, and a counter where a permanent plastic drying tray has been quietly stealing a third of your workspace. |
| 17"×12" | A small kitchen or a rental, where anything that doesn't roll up and go in a drawer isn't worth owning. |
If it doesn't span your sink, it still works flat on the counter as a trivet and drying surface — but check the measurement first.
What can you actually put on it?
It's a set of steel rods over a gap, so anything that spans two rods sits fine and anything smaller falls through. That's the whole logic of it, and it covers most of what leaves a sink wet.
| Works on | Avoid |
|---|---|
| Plates, bowls, mugs, chopping boards and pans, draining straight into the sink | Teaspoons and small cutlery, which drop between the rods into the drain |
| Rinsed produce — it doubles as a colander shelf while you prep | Loading everything onto one end, which is how any bridging rack gets tipped |
| Warm soapy water and a soft cloth, dried off after | Steel wool and scouring powder, which scratch the finish and leave marks that hold grime |
The step people skip: rolling it up when you're done. Left permanently over the sink it just becomes a drying rack with extra steps — the entire point is that the counter goes back to being empty.
The dish rack stops being a permanent resident of your countertop.
A plastic drying rack occupies the same square foot of bench forever, collects a film of grey water in its tray, and has to be moved every time you want to chop something. This rolls out over the sink when there are dishes, then rolls up and goes in a drawer or hangs on a hook. The water drains straight down where it was always going to go, so there's no tray to empty and no puddle creeping under the rack.
Rolling is the feature; stainless is why it keeps rolling
The mechanism here is simple and it's the thing that has to last: individual steel rods linked so the whole mat flexes in one direction and stays rigid in the other. That means it can bridge a sink under the weight of a full stack of plates but still curl up into a cylinder about the size of a rolling pin. The joints between the rods are where a cheap version dies — water sits in them, rust starts, and eventually the roll seizes half open. Stainless steel is what stops that: the corrosion resistance is in the metal rather than in a coating that chips at exactly the flex points. The non-slip contact points do the other job, keeping it from creeping across a wet stainless sink rim while you're stacking.
- 17"×12" — the one size. Long enough to span a standard sink and take a stack of dinner plates, small enough to roll into a drawer, a cupboard or onto a hook.
What You're Getting
- One Stainless Steel Dish Drying Rolling Rack in 17"×12"
- Stainless steel rods, so the flex joints don't rust and seize the roll half open
- Rolls up into a cylinder for a drawer, a cupboard or a hook
- Bridges the sink so water drains where it's already going — no tray to empty
- Non-slip contact points that stop it creeping on a wet sink rim
- Doubles as a trivet and a rinsed-produce shelf while you prep
- Measure your sink span first — 17" is the number that has to work
- Warm soapy water and a soft cloth; no steel wool or scouring powder
Free tracked shipping to your door. Easy 30-day returns.
Free tracked shipping to your door
30 days to live with it. Send it back if it’s not the one — fewer than 1% of customers ever do.
Shipping Info
Processing
Orders are packed and dispatched within 1–3 business days of payment.
Delivery time
- USA — 5–10 business days after dispatch
We ship within the United States only.
Tracking
Every order ships with end-to-end tracking. You’ll get a tracking link by email the moment your parcel leaves the warehouse.
Money Back Guarantee
If a piece doesn’t feel right in your home, get in touch within 30 days of delivery. We’ll arrange a refund or exchange — whichever you prefer.
No essays required. No restocking fees. Just a quick email to support@loftandstone.com and we’ll take it from there.
Fewer than 1% of customers ever need to use this, but the option’s always there — because home should feel like home.
